Wireless Communication
EU RED Network Security Standard EN 18031
Wireless and communication detection
Mobile communication product certification
Bluetooth BQB Product Certification
FM/AM Product Certification
WiFi Product Certification
Wireless charging product certification
Interphone product certification
Base station certification
SAR testing
Receiver Product Certification
5G NR Product Certification
UWB Product Certification
Internet of Things authentication
Electromagnetic compatibility
Automotive Electronics EMC Testing
EMC rectification
EMC
Automotive Electronics
Electrical performance testing
EMS testing - radiation anti-interference testing system (including radar waves)
EMS Testing - Electrostatic Discharge
EMS Test - Transient Conducted Immunity Test
EMS Testing - Portable Transmitter Immunity
EMS Test - High Current Injection (BCI) Test
EMS test - low-frequency magnetic field anti-interference test
EMI Testing - Transient Conducted Emissions Testing System
EMI testing - low-frequency magnetic field emission
EMI Test - Radiation Emission Test
EMI Test - Conducted Emissions Test
Automotive Electronic Testing
Automotive Parts Inspection
Automotive ELV&VOC
Reliability testing
Temperature shock test
Vibration testing
Instrument panel/instrument panel three comprehensive vibration test
Comprehensive vibration test of door inner panel III
Sunvisor Three Comprehensive Vibration Test
Spoiler Three Comprehensive Vibration Test
Three comprehensive vibration tests of car front and rear bumpers
Three comprehensive vibration tests for lamp housing/lampshade
Comprehensive vibration test of outer circumference three
Automotive metal material testing
Performance testing of automotive lighting fixtures
Rapid temperature change test
Vibration
Common issues with vibration testing
Common issues with fatigue testing
Common issues with high and low temperature testing
Conducted Interference (CE) - Suzhou Lixun Standard
Electromagnetic Radiation Tolerance Test (RS) - Suzhou LCS Standard
Electrical Fast Pulse Withstand Test (EFT) - Suzhou LCS Standard
Voltage flicker test - Suzhou LCS standard
Electronic appliances
Household appliance product testing
Electrical accessory product testing
Household appliance testing
Chemical Testing
Introduction to PFAS Testing
MOSH/MOAH Mineral Oil Testing Service
MOSH/MOAH Mineral Oil Testing and Certification Report Service
Consumer Product Testing Services - WEEE Chapter
Ecological textile testing
Leather Footwear Inspection
Food contact material testing
Testing of toys and baby products
Hazardous substance testing
Electronic Cigarette Testing
Electronic cigarette detection
Reliability testing
Other tests - pencil hardness test
Mechanical testing - Packaging compression test
Climate environment testing - Xenon lamp aging test
Battery Testing
Power storage battery testing and certification
Consumer Electronics Battery Testing and Certification
power battery
Light electric vehicle batteries
Energy storage battery
Portable battery
Battery testing
battery test
Lamp Inspection
Inspection of ship lighting fixtures
COI Index Test for Medical Indoor Lighting
Lamp safety inspection
Luminaire energy efficiency testing
EMC testing of lighting fixtures
Integral Ball Laboratory
Photobiology Experiment
Light distribution test
Lamp aging test
Lamp IP waterproof
Lamp performance testing
Lamp reliability testing
Children's toy testing
Testing standards for toy products
China Certification
China's "national promotion" RoHS certification
China Energy Efficiency Label Certification
China Energy Conservation Certification
China CQC Certification
Tmall JD Quality Inspection Report
China SRRC Certification
Taiwan BSMI certification
Taiwan NCC certification
China CCC Compulsory Certification
Asia Certification
Vietnam certification
KC certification
KUCAS Certification in Kuwait
Singapore PSB certification
Iraq COC Certification
IMDA certification
VCCI Certification in Japan
JATE certification in Japan
PSE certification
BIS certification
Japanese TELEC certification
European Certification
RoHS certification
GOST certification in Russia
Russian EAC certification
Northern Ireland UKNI logo
Electrical ENEC certification
European D-MARK certification
Türkiye BTK certification
TSE certification in Türkiye
CE certification in Türkiye
RED certification
German TUV-SUD certification
CE-ERP certification
REACH certification
German GS certification
EU E-Mark certification
North American Certification
Ecuador VOC certification
Mexico NOM certification
IRAM certification
CPSC Certification in the United States
CSA certification
ASTM certification
FDA certification
CEC certification
ETL certification
ul certification
IC certification
Energy Star
FCC Certification in the United States
ASTM certification
Middle East Certification
Israel SII certification
Saudi SABER certification
GCC certification for the seven Gulf countries
Iran COI certification
Qatar COC Certification
Iraq COC Certification
Saudi EER Energy Efficiency Certification
Saudi SABER certification
Algeria PCA certification
PVOC certification
Australia Certification
New Zealand IC-F testing
VEET certification
LCP certification
GEMS certification
RCM certification
C-Tick certification
SAA certification
Africa Certification
Gabon COC certification
Algeria COC certification
Ethiopian VOC and COC certification
Mauritius VOC certification
Ghana COC certification
COC certification in Burundi
Zambia COC certification
Botswana COC Certification
Uganda PVOC certification
SABS certification in South Africa
South African LOA certification
Zimbabwe CBCA Certification
Nigeria SONCAP certification
Kenya PVOC certification
African COC certification
Other certifications
WEEE
Bluetooth BQB certification
IECEE registration
MHRA registration in the UK
TRAINING
Management system training
Laboratory technical training
Laboratory Process Consulting
Laboratory decoration construction
Wireless Communication
Electromagnetic compatibility
Automotive Electronics
Automotive Parts Inspection
Electronic appliances
Chemical Testing
Electronic Cigarette Testing
Reliability testing
Battery Testing
Lamp Inspection
Children's toy testing
China Certification
Asia Certification
European Certification
North American Certification
Middle East Certification
Australia Certification
Africa Certification
Other certifications
TRAINING
Wireless Communication
Electromagnetic compatibility
Automotive Electronics
Automotive Parts Inspection
Electronic appliances
Chemical Testing
Electronic Cigarette Testing
Reliability testing
Battery Testing
Lamp Inspection
Children's toy testing
China Certification
Asia Certification
European Certification
North American Certification
Middle East Certification
Australia Certification
Africa Certification
Other certifications
TRAINING
Wireless Communication
Electromagnetic compatibility
Automotive Electronics
Automotive Parts Inspection
Electronic appliances
Chemical Testing
Electronic Cigarette Testing
Reliability testing
Battery Testing
Lamp Inspection
Children's toy testing
China Certification
Asia Certification
European Certification
North American Certification
Middle East Certification
Australia Certification
Africa Certification
Other certifications
TRAINING
Wireless Communication
Electromagnetic compatibility
Automotive Electronics
Automotive Parts Inspection
Electronic appliances
Chemical Testing
Electronic Cigarette Testing
Reliability testing
Battery Testing
Lamp Inspection
Children's toy testing
China Certification
Asia Certification
European Certification
North American Certification
Middle East Certification
Australia Certification
Africa Certification
Other certifications
TRAINING
Wireless Communication
Electromagnetic compatibility
Automotive Electronics
Automotive Parts Inspection
Electronic appliances
Chemical Testing
Electronic Cigarette Testing
Reliability testing
Battery Testing
Lamp Inspection
Children's toy testing
China Certification
Asia Certification
European Certification
North American Certification
Middle East Certification
Australia Certification
Africa Certification
Other certifications
TRAINING
Wireless Communication
Electromagnetic compatibility
Automotive Electronics
Automotive Parts Inspection
Electronic appliances
Chemical Testing
Electronic Cigarette Testing
Reliability testing
Battery Testing
Lamp Inspection
Children's toy testing
China Certification
Asia Certification
European Certification
North American Certification
Middle East Certification
Australia Certification
Africa Certification
Other certifications
TRAINING
International Market Access Information for August 2023
Author.
LCS
Source:
Post time:
2023-09-27
Asia
India
India releases latest amendments to electronic pre packaged products
Recently, the Consumer Affairs Department of the Indian Ministry of Consumer Affairs, Food and Public Distribution has released the latest amendments to electronic pre packaged products.
This amendment modifies specific parts of the previous notice issued on July 14, 2022. According to the revised notice dated June 23, 2023, entities are now allowed to provide the following information through QR codes that are not included in product packaging:
Address of manufacturer/packer/importer;
Common name;
Dimensions and dimensions;
Other relevant information.
Indonesia
Indonesia SDPPI certification adds SAR testing requirements
On July 12, 2023, the Indonesian Postal and Information Equipment Standardization Authority (SDPPI) announced the implementation of specific absorption rate (SAR) testing requirements.
As one of the requirements for telecommunications equipment certification, the fulfillment of SAR testing obligations will be implemented in stages, with the initial stage starting from December 2023 for head testing of mobile phone products.
The following is a list of managed products and mandatory implementation dates:
Vietnam
Vietnamese Ministry of Information and Communications Changes Certification Requirements
In August 2023, the Vietnamese Ministry of Information and Communications (MIC) changed the requirements for type approval certification. In the future, the type approval certificate will list all detailed information of the manufacturer and factory (OEM), as follows:
If there are multiple factories, each factory requires its own type approval certificate and sample device.
If the factory does not belong to the manufacturer, more document requirements need to be provided and virtual factory inspections may be conducted.
Malaysia
Malaysia SIRIM Extends Provisional Type Approval for IPv6 Cellular Devices Without Wi Fi Interface Again
On July 13, 2023, the Malaysian Institute of Standards and Industrial Research (SIRIM) issued notice SQASI/CMCS/1/23/0004.
This announcement announced the extension of the temporary type approval application for IPv6 cellular devices without Wi Fi interfaces for another year. Therefore, before July 10, 2024, the maximum validity period for new applications and updates of Compliance Certificates (CoCs) for all IPv6 cellular devices without Wi Fi interfaces is one year.
The announcement will take effect from July 10, 2023, until SIRIM notifies otherwise.
Japan
Japan Revises Regulations on Radio Equipment
The Ministry of the Interior and Communications of Japan has issued TBT notifications G/TBT/N/JPN/775 and G/TBT/N/JPN/775/Corr.1 through the WTO, proposing to revise the regulations on wireless local area network radio equipment systems (in the 2.4gz band). The reason for this modification is to update the 2.4GHz band using a wireless local area network system.
The main content of the amendment is:
Project revision;
Any communication system that is unidirectional, single, half duplex, or duplex;
Adjusting DSS, amplitude modulation, phase modulation, frequency modulation, pulse modulation, or any combination of these, as well as any modulation of OFDM;
The allowable deviation of antenna power is -80% to+20%.
Proposed effective date: October 2023, proposed adoption date: October 2023.
Singapore
Singapore to shut down 3G network
Starting from July 31, 2024, Singapore operators M1, Singtel, and StarHub announced that they will shut down all 3G services, including voice, messaging, and data, which are no longer widely used in Singapore. After the shutdown of 3G networks, mobile operators plan to reuse the freed up spectrum to improve 5G services.
Saudi Arabia
Saudi Arabia will standardize charging ports for mobile phones and electronic devices to USB Type-C
The Kingdom of Saudi Arabia has decided to standardize the charging ports for mobile phones and electronic devices starting from January 1, 2025. USB Type-C will serve as the only standardized connector.
The Saudi Organization for Standards, Metrology, and Quality (SASO) and the Committee on Communications, Space, and Technology (CST) have issued the latest announcement announcing the mandatory phase of unifying charging ports for mobile phones and electronic devices in the Saudi market.
The enforcement of this decision will be implemented in two stages as follows:
Most of the affected electronic devices mentioned above are controlled by the SASO IECEE Accreditation Certificate (SIRC), and other products must also apply for mandatory product conformity certificates (P-CoCs) and shipping conformity certificates (S-CoCs) issued by SASO approved conformity assessment agencies.
Europe
Britain
UK announces indefinite retention of EU "CE" certification
Recently, the UK released the latest news that the Department of Commerce and Trade (DBT) has announced the indefinite recognition of the CE mark after the December 2024 deadline.
After extensive contact with the industry, the Ministry of Commerce and Trade has made a decision to extend the recognition of the CE mark. As part of the government's efforts to promote smarter regulatory measures, the extension of CE mark recognition will reduce enterprise costs, shorten the time required for products to be launched on the market, and benefit consumers, achieving the key requirements of enterprises to reduce burden and promote UK economic growth.
Applicable regulations include: toys, fireworks, leisure boats and personal boats, simple pressure vessels, electromagnetic compatibility, non automatic weighing instruments, measuring instruments, measuring container bottles, elevators, potentially explosive environmental equipment (ATEX), radio equipment, pressure equipment, personal protective equipment, gas appliances, machinery, outdoor use equipment, aerosols, and low-voltage electrical equipment.
EU
EU Food Contact Materials Plastic Regulations Add an Authorized Substance
The European Commission approved Amendment (EU) 2023/1627 to amend the Regulation No 10/2011 on Plastic Food Contact Materials and Articles. The amendment will take effect on August 31, 2023.
(EU) No 10/2011 Appendix I added item 1079 of substance to the positive list: bis (2-ethylhexyl) cyclohexane-1,4-dicarboxylate (DEHCH). Please refer to the following for details:
South America
Argentina
Label Requirements for Argentina ENACOM Renewal
On August 12, 2022, the Argentine National Communications Administration (ENACOM) issued letter No. NO-2022-83513667-APN-DYNART # ENACOM, changing the labeling requirements for certificate renewal.
Due to the full implementation of new regulation 854/2020, all new applications for certification can only use the RAMATEL marking style; For products that have already been certified, ENACOM allows products to continue using existing CNC label designs during certificate updates.
From now on, ENACOM will only accept label style designs based on RAMATEL.
North America
Canada
Canada Revised Radiation Emission Device Regulations
Canada has issued a notice amending the Radiation Emission Device Regulations. This revision expands the regulatory requirements to include all laser equipment (excluding medical devices), including demonstration lasers and laser scanners.
This regulation will introduce the IEC classification system for "laser products" by referencing the relevant content of IEC 60825-1:2014, ranking equipment based on their level of danger, and establishing testing methods and rules to support compliance monitoring, verification, and related law enforcement activities, and to help individuals who purchase and use laser products make more informed purchasing decisions.
The regulatory review period ends on September 14, 2023
Oceania
New Zealand
New Zealand RSM updates SRD regulations
On August 1, 2022, New Zealand Radio Spectrum Management (RSM) implemented a new universal user radio license for short range equipment. The main changes are as follows:
1. Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC) can only be applied to the 5250-5350 MHz frequency band within the 5150-5350 MHz range.
2. The additional frequency range of WLAN is in the 5925-6425 MHz frequency band. The possible operating modes are as follows:
Indoor: 24dBm EIRP
Indoor/Outdoor: 14dBm EIRP
3. 60GHz devices can operate in the frequency range of 57-71 GHz (increased allowable power: 25dBW EIRP). The previous requirement for 'indoor systems only' has also been cancelled.
Africa
Mauritius
Mauritius ICTA enables 6 GHz frequency band
On August 4, 2022, the Mauritius Information and Communication Technology Authority (ICTA) issued a decision on the allocation of additional spectrum for broadband wireless access services in the 5945-6425 MHz frequency range, allowing the 5945-6425 MHz frequency band to be used for the following devices:
Indoor Low Power (ILP) equipment for indoor use only. It is not allowed to use ILP equipment outdoors (including equipment in road vehicles)
Ultra Low Power (VLP) equipment for indoor and outdoor use. Except for fixed outdoor equipment. The use of VLP devices on radio control models is prohibited.
Related articles
New articles
Media Center
Latest News
Contact Us
National 24-hour service hotline
400-116-2629
Group Headquarters
E-mail: webmaster@lcs-cert.com
Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor
WeChat Inquiry
Reservation
Contact Us
National 24-hour service hotline
Address：Juji Industrial Park, Xueziwei, Ngabian, Shajing Street, Baoan District, Shenzhen Building A 1~2F, Building C 3F
WeChat public number
Share industry dry goods
WeChat consultation
Please note consulting services
Follow Jitterbug
Mobile website
di complaint mailbox: customer.complaint@lcs-cert.com complaint telephone tel: 18126445450 certificate report verification of authenticity mailbox: verification@lcs-cert.com