图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Lamp cap torque

The strength of the combination between the light source casing and the lamp head

Lamp head torque testing is a key item in the reliability testing of lighting products, mainly used to evaluate the bonding strength between the light source housing and the lamp head, ensuring that it will not loosen, fall off or be damaged during installation, use or transportation. The following is a detailed analysis of the torque test for lamp heads:

 

1. Test purpose

Structural integrity verification: Ensure that the connection between the lamp head and the housing can withstand the torque during installation or disassembly.

Safety assessment: To prevent electrical contact problems, short circuits, or fire risks caused by loose lamp heads.

Compliance inspection: Meet the requirements of international standards (such as IEC, UL, GB) for lamp head torque.

 

2. Testing principle

Apply torque: Use a torque meter or torque tester to apply clockwise or counterclockwise torque to the lamp head.

Measurement limit value: Record the torque value when the lamp head and housing rotate or are damaged relative to each other.

Evaluation result: Compare the measured values with the standard requirements to determine whether they are qualified.

 

3. Testing equipment

Torque meter: A high-precision digital torque meter with a range typically ranging from 0.1 to 10 N · m.

Fixture: used to fix the light source housing to ensure uniform force on the lamp head during testing.

Data recording system: Real time recording of torque values and generation of test reports.

 

 

4. Testing steps

Sample preparation: Select samples that meet the standards and ensure that the lamp head and housing are installed in place.

Fixed sample: Fix the light source housing on the test bench with the lamp head facing upwards.

Apply torque:

Apply torque clockwise until the standard torque value is reached or the lamp head rotates.

Repeat the test counterclockwise.

Record data: Record the torque value when the lamp head starts to rotate or is damaged.

Result evaluation: Compare the measured values with the standard requirements to determine whether they are qualified.

 

5. Industry standards and requirements

IEC 60061-3: specifies the size and mechanical strength requirements for lamp heads.

UL 496 provides detailed instructions on the torque testing method and qualification standards for lamp heads.

GB/T 1483: Chinese National Standard, specifies the torque testing method for lamp heads.

Common requirements for lamp head torque

Base Type torque requirement(N·m)Testing direction
E26/E273.0Clockwise/counterclockwise
B22d2.5Clockwise/counterclockwise
GU103.0Clockwise/counterclockwise
G13(Fluorescent lamp)1.5Clockwise/counterclockwise

6. Common Failure Modes

Loose lamp head: The torque does not meet the standard requirements, and the connection between the lamp head and the housing is not firm.

Lamp head fracture: Insufficient material strength resulted in damage to the lamp head during testing.

Shell deformation: Insufficient strength of the shell material resulted in shell deformation during testing.

 

7. Influencing factors

Material strength: The material strength of the lamp head and the shell directly affects the torque test results.

Processing technology: The accuracy of injection molding, die casting, or thread machining will affect the bonding strength.

Design structure: The connection method between the lamp head and the housing (such as threads, buckles) has a significant impact on the torque performance.

 

8. Improvement measures

Optimize materials: Choose high-strength and wear-resistant materials (such as PBT, PC).

Improved process: Improve the accuracy of injection molding or die casting to ensure a tight fit between the lamp head and the housing.

Strengthen design: increase the contact area of the connecting parts or use anti loosening structures (such as spring washers).

 

9. Test report content

Sample information (model, batch, lamp head type).

Testing equipment and conditions (torque meter model, ambient temperature).

Test data (measured torque values, failure modes).

Conclusion (qualified/unqualified).

 

10. Practical application cases

LED bulb: In the torque test of a certain brand E27 lamp head LED bulb, the measured torque value is 3.2 N · m, which meets the requirements of IEC 60061-3 standard.

Fluorescent tube: During testing, a G13 lamp head fluorescent tube had a loose lamp head, which was analyzed to be due to insufficient thread machining accuracy. After improvement, it passed the test.

By conducting torque tests on lamp heads, companies can ensure that the mechanical strength of their products meets standard requirements and avoid after-sales problems caused by loose or damaged lamp heads. Data shows that about 15% of after-sales problems in lighting products are related to poor connection of lamp heads (data source: Lighting Industry Association), so lamp head torque testing is an important means to improve product quality.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year