图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Lamp performance testing

IEC 62722; GB/T 31897 Performance Testing of Luminaires

Lamp performance testing is an important testing method for evaluating the performance of lamps (such as LED lamps, fluorescent lamps, etc.), mainly based on IEC 62722 and GB/T 31897 standards. The following is a detailed explanation about the performance testing of lighting fixtures:

 

1. Overview of Testing Standards

(1) IEC 62722

Full name: IEC 62722 Luminaires - Performance requirements.

Scope of application: Suitable for performance testing of general lighting fixtures.

Main content: including performance indicators such as luminous flux, luminous efficiency, color temperature, color rendering index, lifespan, electrical characteristics, mechanical characteristics, etc.

(2) GB/T 31897

Full name: GB/T 31897 "Performance Requirements for Luminaires".

Scope of application: Suitable for performance testing of general lighting fixtures in the Chinese market.

Main content: Similar to IEC 62722, including performance indicators such as luminous flux, luminous efficiency, color temperature, color rendering index, lifespan, electrical characteristics, mechanical characteristics, etc.

 

2. Main testing items

(1) Luminous flux

Definition: The total amount of light emitted by a lamp, measured in lumens (lm).

Test method: Use an integrating sphere and a photometer to measure the luminous flux of the lamp.

(2) Light effect

Definition: The ratio of luminous flux to input power of a luminaire, measured in lumens per watt (lm/W).

Test method: Measure the luminous flux and input power of the lamp, and calculate the luminous efficiency.

(3) Color temperature

Definition: The color characteristics of the light emitted by a lamp, measured in Kelvin (K).

Test method: Use a colorimeter to measure the color temperature of the lighting fixture.

(4) Color rendering index (CRI)

Definition: An indicator of the ability of a lighting fixture to reproduce the color of an object, ranging from 0 to 100.

Testing method: Use a spectral radiometer to measure the spectral distribution of the lamp and calculate the color rendering index.

(5) Lifespan

Definition: The time it takes for a lamp to operate under rated conditions until the luminous flux decays to 70% of its initial value.

Testing method: Evaluate the lifespan of the lighting fixture through accelerated lifespan testing or actual lifespan testing.

(6) Electrical characteristics

Input voltage: The rated input voltage of the lighting fixture.

Input current: The rated input current of the lighting fixture.

Power factor: The ratio of active power to apparent power of a lighting fixture.

Harmonic distortion: The proportion of harmonic components in the input current of a lighting fixture.

(7) Mechanical characteristics

Structural strength: The structural strength and durability of the lighting fixture.

Protection level: The dustproof and waterproof level (IP level) of the lighting fixture.

(8) Thermal characteristics

Junction temperature: The temperature of LED chips affects the performance and lifespan of lighting fixtures.

Thermal resistance: The thermal conductivity characteristics of a lighting fixture.

 

3. Testing equipment

Integral sphere: used for measuring luminous flux and luminous efficiency.

Photometer: used to measure light output.

Colorimeter: used to measure color temperature and color rendering index.

Power analyzer: used to measure power factor and harmonic distortion.

Thermal imaging instrument: used to measure junction temperature and thermal resistance.

Lifetime testing equipment: used to evaluate the lifespan of lighting fixtures.

Mechanical testing equipment: used to evaluate the structural strength and protection level of lighting fixtures.

 

4. Corporate Responsibility

(1) Product Design

Optimize the design of lighting fixtures to improve light efficiency, color rendering index, and lifespan.

Choose high-quality LED chips and driver circuits to reduce harmonic distortion.

(2) Compliance testing

Ensure that the product complies with IEC 62722 and GB/T 31897 standards through performance testing of lighting fixtures.

Prepare complete technical documents, including test reports, design drawings, etc.

(3) Labels and identification

Label performance parameters on the product, such as luminous flux, luminous efficiency, color temperature, color rendering index, etc.

Provide instructions for use, including applicable conditions, safety precautions, etc.

 

5. Summary

Lamp performance testing is an important method for evaluating the performance of general lighting fixtures. According to IEC 62722 and GB/T 31897 standards, it covers indicators such as luminous flux, luminous efficiency, color temperature, color rendering index, lifespan, electrical characteristics, mechanical characteristics, etc. Enterprises need to optimize product design, ensure product compliance with relevant standards through performance testing, fulfill compliance responsibilities, and enhance product quality and market competitiveness.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year