图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Strobe test

The flicker of lamps or light sources refers to the fluctuation characteristics of light output, which means that the light source, driven by AC or pulsed DC power supply, undergoes corresponding changes in luminous flux, illuminance or brightness with the periodic variation of current amplitude. The characteristic of the intensity of light changing over time

 

Strobe testing is an important testing method for evaluating the fluctuation characteristics of light output of lamps or light sources, aiming to detect the characteristics of the light source's luminous flux, illuminance or brightness changing over time under the drive of AC or pulsed DC power supply. The following is a detailed explanation about the flicker test:

 

1. Overview of flicker

Definition: Strobe refers to the fluctuation of light output caused by periodic changes in current when a light source is driven by an AC or pulsed DC power supply.

Manifestation: The intensity of light varies over time and may manifest as flickering, shaking, or fluctuations.

Influencing factors: power frequency, driver circuit design, light source type, etc.

 

2. Hazards of flicker

(1) Visual fatigue

Strobe can cause eye fatigue, headaches, and vision loss.

Long term exposure to flickering light sources may cause visual discomfort.

(2) Health risks

High frequency flashes may cause seizures or other neurological problems.

Low frequency flicker may lead to lack of concentration and emotional fluctuations.

(3) Work efficiency

Flashing can affect work efficiency, especially in situations that require precise operation.

 

3. Strobe testing method

(1) Testing equipment

Photometer: used to measure luminous flux, illuminance, or brightness.

High speed camera: used to capture the fluctuation characteristics of light output.

Spectrum analyzer: used to analyze the frequency components of light output.

(2) Test parameters

Frequency: Measure the fluctuation frequency of light output.

Wave depth: measures the amplitude of fluctuations in light output.

Flicker index: evaluates the severity of flicker.

(3) Test steps

Preparation: Fix the light source on the testing platform and connect the power supply.

Measurement: Use a photometer or high-speed camera to measure the fluctuation characteristics of light output.

Analysis: Use a spectrum analyzer to analyze the frequency components of the light output.

Assessment: Evaluate the severity of flicker based on test results.

 

4. Strobe standard

(1) IEEE PAR1789

Low frequency flicker: frequency below 90 Hz, fluctuation depth less than 8%.

High frequency flicker: frequency higher than 90 Hz, fluctuation depth less than 3.3%.

(2) ENERGY STAR

Flicker index: less than 0.15.

Wave depth: less than 30%.

(3) CIE TN 006

Strobe visibility: Evaluate the visibility of flicker to the human eye.

 

5. Corporate Responsibility

(1) Product Design

Optimize the driver circuit design to reduce flicker.

Choose high-quality light sources and power components.

(2) Compliance testing

Ensure that the product meets relevant standards through flicker testing.

Prepare complete technical documents, including test reports, design drawings, etc.

(3) Labels and identification

Label the product with flicker related information to ensure that consumers understand the flicker characteristics of the product.

 

6. Summary

Strobe testing is an important method for evaluating the fluctuation characteristics of light output from lamps or light sources, which helps to reduce the impact of flicker on visual health and work. Enterprises need to optimize product design, ensure product compliance with relevant standards through flicker testing, fulfill compliance responsibilities, and improve product quality and user experience.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year