图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Heat distortion temperature

The temperature at which the sample reaches the specified bending strain under the specified load and heating rate

Test purpose
Evaluate the deformation performance of materials under heat and load conditions, determine the temperature at which the material reaches the specified bending strain, and determine its heat deformation temperature (HDT).

 

Test Standard
According to the standard:

ISO 75: Determination of Thermal Deformation Temperature of Plastics

ASTM D648: Determination of Thermal Deformation Temperature of Plastics under Bending Load

GB/T 1634: Determination of temperature of plastic deformation under load

 

Test Principle
At a constant load and heating rate, measure the temperature at which the specimen reaches the specified bending strain (usually 0.2mm or 0.25mm), which is the thermal deformation temperature.

test equipment
Hot deformation temperature testing machine

Load device (weight or mechanical loading system)

Temperature control system

Deformation measuring device (micrometer or displacement sensor)

Sample holder

Test steps
 

Sample preparation:

Prepare standard specimens with dimensions that meet the testing requirements (typically 80mm x 10mm x 4mm).

Record the initial state of the sample (taking photos, measuring dimensions, etc.).

Test condition settings:

Load: Set according to demand (usually 0.45MPa or 1.82MPa).

Heating rate: set according to standards (usually 2 ℃/min or 120 ℃/h).

Bending strain: set according to standards (usually 0.2mm or 0.25mm).

 

Test Run:

Place the sample on the sample holder, ensuring that the span meets the standard (usually 64mm).

Apply the specified load.

Activate the temperature control system to heat the sample at the specified heating rate.

Real time monitoring of sample deformation until the specified bending strain is reached.

Test completed:

Record the temperature at which the specimen reaches the specified bending strain, which is the heat distortion temperature (HDT).

Stop heating and remove the sample.

Result evaluation:

Record the heat distortion temperature (HDT).

Check the deformation of the sample (such as bending, cracks, etc.).

 

Precautions
Ensure accurate load application and avoid bias affecting test results.

The heating rate needs to be strictly controlled to avoid being too fast or too slow.

The sample should be placed horizontally to avoid uneven stress.

 

Test Record
Record the testing conditions (load, heating rate, bending strain, etc.).

Record the initial state of the sample (taking photos, measuring dimensions, etc.).

Record the hot deformation temperature (HDT) and the deformation of the specimen.

 

Conclusion
Based on the test results, evaluate the thermal deformation performance of the material and issue a test report. Through this test, important basis can be provided for material selection, product design, and process improvement, ensuring the reliability of the product in high temperature environments.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year