图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Climatic environment testing - Step by step temperature test

Step by step temperature test (also known as step by step stress test or step by step temperature change test) is a testing method used to evaluate the performance and reliability of materials, components, or equipment under gradually changing temperature environments. By gradually increasing or decreasing the temperature, the performance changes or failure of the tested object under different temperature conditions are detected to determine its working temperature range and limit temperature.

 

Purpose of stepwise temperature test
Evaluate temperature adaptability:

Detect the performance changes of materials or equipment under different temperature conditions.

Determine the maximum temperature:

Determine the maximum or minimum operating temperature and failure temperature of the product.

Verify reliability:

Ensure that the product can function properly in a gradually changing temperature environment and avoid failure caused by temperature stress.

Quality Control:

As an important testing project in the product development and production process, it ensures that the product complies with relevant standards and specifications.

 

The principle of stepwise temperature test
Place the sample in a gradually increasing or decreasing temperature environment, simulate the temperature change conditions in actual use by controlling the temperature change step size, residence time, and test parameters. After testing, observe the performance changes or failure of the sample.

Types of stepwise temperature testing
Step by step heating test:

Starting from room temperature, gradually increase the temperature and test the performance changes of the sample under high temperature conditions.

Cooling step test:

Starting from room temperature, gradually reduce the temperature and test the performance changes of the sample under low temperature conditions.

 

Steps of Step by Step Temperature Test
Sample preparation:

Ensure that the sample meets the testing requirements and record the initial performance data.

Set experimental conditions:

Set the starting temperature, ending temperature, temperature step size, dwell time, and testing parameters according to the testing standards.

Place the sample:

Place the sample in a step temperature test chamber and ensure that it is in full contact with the air inside the chamber.

Start the experiment:

Start the step temperature test chamber and gradually increase or decrease the temperature according to the set program.

Observation and recording:

During each temperature step, observe the performance changes or failure of the sample and record the data.

Recovery and detection:

Restore the sample to room temperature and test whether its performance has returned to normal.

 

Parameters of stepwise temperature test
Starting temperature:

Select an appropriate starting temperature based on testing standards, typically at room temperature (25 ° C).

Termination temperature:

Select an appropriate termination temperature based on testing standards, typically high temperature (such as 150 ° C) or low temperature (such as -40 ° C).

Temperature step size:

Select the appropriate temperature step size according to the testing standards, usually 5 ° C, 10 ° C, etc.

Stay time:

The duration of stay at each temperature step is usually 30 minutes to 1 hour.

Test parameters:

Select appropriate testing parameters based on testing standards, such as electrical performance, mechanical performance, etc.

 

Application of Step by Step Temperature Test
electronic product:

Test the performance of electronic products such as mobile phones, tablets, and batteries under different temperature conditions.

Automotive industry:

Evaluate the reliability of automotive components such as engines, tires, batteries, etc. under different temperature conditions.

Aerospace:

Test the performance of aerospace equipment under extreme temperature conditions.

Materials Science:

Evaluate the changes in physical and chemical properties of materials such as plastics, rubber, and metals under different temperature conditions.

Semiconductors and electronic components:

Test the reliability of semiconductor devices, PCB boards, etc. under different temperature conditions.

 

Instrument for stepwise temperature testing
The commonly used step temperature testing instrument is the step temperature testing chamber, which has the following main features:

Can control high and low temperature ranges (such as -70 ° C to 150 ° C or higher).

Equipped with a gradual temperature change function, supporting temperature step size and dwell time settings.

Equipped with data recording and monitoring system.

 

Precautions for stepwise temperature test
Sample selection:

The sample should be representative and avoid selecting areas with defects or unevenness.

Experimental conditions:

Strictly follow the testing standards to set the starting temperature, ending temperature, temperature step size, dwell time, and testing parameters.

Environmental control:

The experimental environment should be kept dry and dust-free to avoid affecting the test results.

Security protection:

During the experiment, protective equipment should be worn to avoid injury to operators caused by high or low temperatures.

 

summary
Step by step temperature testing is an important method for evaluating the performance and reliability of materials, components, or equipment under gradually changing temperature environments. It detects changes in performance or failure by simulating gradually increasing or decreasing temperature conditions. It has a wide range of applications in electronic products, automotive industry, aerospace, materials science and other fields, and is a key testing project to ensure product quality and reliability.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year