图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Screw torque test

Assess the firmness of screw fixation

Screw torque testing is one of the important methods for evaluating the firmness of screw fixation, mainly by measuring the torque required during the tightening process and its anti loosening ability to determine its fixation performance. The following is the detailed content of the screw torque test:

 

1. Test purpose
Evaluate the torque characteristics of screws during the tightening process.

Determine the maximum tightening torque and anti loosening ability of the screw.

Ensure that the screws can provide sufficient fixing force in practical applications to prevent loosening or failure.

 

2. Testing principle
The screw torque test mainly simulates the tightening process of screws by applying torque and measures the following key parameters:

Tightening torque: The torque required to tighten the screw to the specified position.

Destructive torque: The torque that causes the screw to break or the thread to be damaged.

Loosening torque: The torque required to loosen a tightened screw.

 

3. Testing equipment
Torque tester: used to measure the tightening torque, breaking torque, and loosening torque of screws.

Torque wrench: used for manual or semi-automatic tightening of screws.

Fixed fixture: used to fix the tested screw and test substrate to ensure the stability of the test.

 

4. Testing methods
(1) Tightening torque test
Install the screws onto the test substrate and gradually tighten them using a torque tester or torque wrench.

Record the torque value when the screw reaches the specified tightening position.

Repeat the test multiple times and take the average value as the tightening torque.

(2) Destructive torque test
Continue tightening the screws until they break or the threads are damaged.

Record the maximum torque value at the time of screw failure.

Analyze failure modes (such as screw breakage, thread slippage, etc.).

(3) Loosening torque test
After tightening the screw to the specified torque, rotate the screw in the opposite direction and measure the torque required for loosening.

Record the loosening torque value and evaluate the anti loosening performance of the screw.

 

5. Testing standards
International standards such as ISO 898-1 (Mechanical properties of bolts and screws) and ISO 16047 (Torque testing methods for fasteners).

Industry standards: such as DIN standards for the automotive industry and NAS standards for the aerospace industry.

Enterprise standard: Internal testing specifications developed based on specific product requirements.

 

6. Test parameters
Torque range: Select the appropriate torque range based on the specifications and application scenarios of the screw.

Tightening speed: Control the tightening speed to avoid inaccurate test results due to excessive speed.

Test frequency: Typically, multiple tests are conducted and the average is taken to improve the reliability of the results.

 

7. Data analysis and evaluation
Tightening torque: Evaluate whether the tightening performance of the screw meets the design requirements.

Destructive torque: Evaluate whether the strength of the screw meets the usage requirements.

Loosening torque: Evaluate the anti loosening ability of screws to ensure that they will not loosen under vibration or load conditions.

Failure mode analysis: By observing the fracture or damage of screws, optimize screw design or material selection.

 

8. Common problems and solutions
Screw fracture: It may be due to insufficient material strength or excessive torque, and material optimization or torque adjustment is needed.

Thread slippage: It may be due to unreasonable thread design or insufficient substrate strength, and the thread design needs to be improved or the substrate needs to be replaced.

Low loosening torque: It may be due to poor thread fit or insufficient pre tightening force, and it is necessary to optimize thread fit or increase pre tightening force.

 

9. Application scenarios
Automobile manufacturing: Evaluate the fixing performance of screws in key parts such as engines and chassis.

Electronic products: Evaluate the tightening and anti loosening ability of screws in precision equipment.

Construction engineering: Evaluate the strength and reliability of steel structure connection screws.

Through screw torque testing, the fixing performance of screws can be comprehensively evaluated to ensure their safety and reliability in practical applications.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year