图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Open circuit and short circuit protection

Open circuit: Test the performance of the sample when one (multiple) lines are disconnected. Short circuit protection: Test the performance of the sample when a short circuit occurs at the input or output end.

Open circuit and short circuit protection testing is a key testing method for evaluating the performance and reliability of equipment under circuit open or short circuit conditions. This test aims to verify whether the equipment can operate safely or take appropriate protective measures to avoid damage or danger under abnormal circuit conditions. The following are the key elements and steps of open circuit and short circuit protection testing:

1. Test objectives
Open circuit protection: Verify the performance of the device when one or more lines are disconnected.

Short circuit protection: Verify the performance of the device when a short circuit occurs at the input or output end.

Safety: Ensure that the equipment will not cause fire, electric shock, or other hazards under open or short circuit conditions.

2. Testing conditions
Open circuit test:

Simulate the disconnection of one or more lines (such as power lines, signal lines).

Check if the equipment can detect an open circuit and take appropriate measures (such as alarm, shutdown).

Short circuit test:

Short circuit occurs at the analog input or output terminal (such as power short circuit, load short circuit).

Check if the equipment can detect short circuits and take protective measures (such as power outage, current limiting).

Environmental conditions: Test under standard conditions (such as temperature of 25 ° C and humidity of 50%), or simulate extreme environments for additional testing.

3. Testing equipment
Programmable power supply: Simulate open or short circuit conditions.

Electronic load: Simulate open or short circuit of the load.

Data logger: records parameters such as voltage and current during the testing process.

Protection circuit tester: used to test the protection function of equipment.

4. Testing steps
open test 
prepare

Identify the lines that need to be disconnected (such as power lines, signal lines).

Check the appearance and function of the equipment, and record the initial state.

Disconnect the line:

Simulate circuit disconnection using a switch or disconnect connector.

Monitoring equipment:

Observe whether the device can detect an open circuit and take appropriate measures (such as alarm, shutdown).

Record data:

Record the reaction and performance of the device under open circuit conditions.

Judgment:

Confirm whether the equipment meets the requirements for open circuit protection.

short-circuit test
prepare

Identify the circuit that needs to be short circuited (such as input power supply, output load).

Check the appearance and function of the equipment, and record the initial state.

Short circuit line:

Use short-circuit clips or wires to simulate a short circuit in the circuit.

Monitoring equipment:

Observe whether the equipment can detect short circuits and take protective measures (such as power outage, current limiting).

Record data:

Record the response and performance of the equipment under short-circuit conditions.

Judgment:

Confirm whether the equipment meets the requirements for short-circuit protection.

5. Judgment criteria
Open circuit protection: The equipment should be able to detect an open circuit and take appropriate measures (such as alarm, shutdown).

Short circuit protection: The equipment should be able to detect short circuits and take protective measures (such as power-off, current limiting).

Safety: The equipment should not cause fire, electric shock, or other hazards under open or short circuit conditions.

6. Improvement measures
Add protection circuits such as overcurrent protection, overvoltage protection, and short-circuit protection circuits.

Optimize detection mechanism: Improve the device's ability to detect open and short circuits.

Material selection: Choose components with higher reliability to improve the equipment's short-circuit resistance.

Software protection: Detecting and protecting open and short circuits through software.

7. Common standards
IEC 60950-1: Information Technology Equipment Safety Standard.

IEC 62368-1: Safety standards for audio and video, information technology, and communication equipment.

GB 4943.1: China Information Technology Equipment Security Standards.

UL 60950-1: American Information Technology Equipment Security Standard.

8. Precautions
Testing safety: Ensure that the equipment is powered off during testing, and operators must wear protective equipment.

Environmental control: Avoid testing in high humidity or high pollution environments.

Multiple tests: Ensure that the device can still function properly under multiple open or short circuit conditions.

User scenario: Simulate open and short circuit situations in actual use.

Through open circuit and short circuit protection testing, the performance and reliability of equipment under abnormal circuit conditions can be evaluated, ensuring its safe operation or taking appropriate protective measures under open or short circuit conditions, and meeting design and application requirements.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year