图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Halogen

Group IIA elements include fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At), collectively known as halogens. Among them, astatine (At) is a radioactive element that is almost non-existent in the product, and the first four elements exist in the form of organic compounds, especially in polymer materials. The halogen compounds currently used in products are mainly flame retardants: PBB, PBDE, TBBP-A, PCB, hexabromododecane, tribromophenol, short chain chlorinated paraffin; Ozone depleting substances used as refrigerants and insulation materials: CFCs, HCFCs, HFCs, etc.

 

Harm: Adding halogens (fluorine, chlorine, bromine, iodine) to polymer products such as plastics to increase their ignition point has the advantage of having a higher ignition point than ordinary polymer materials, with an ignition point of approximately 300 ℃. During combustion, halogenated gases (fluorine, chlorine, bromine, iodine) are emitted, which quickly absorb oxygen and extinguish the fire. However, its disadvantage is that when the concentration of chlorine gas released is high, the visibility will decrease, making it difficult to identify escape routes. At the same time, chlorine gas has strong toxicity and affects the respiratory system of humans. In addition, the halogen gas released from the combustion of halogenated polymers, when combined with water vapor, will produce corrosive and harmful gases (hydrogen halides), causing corrosion to some equipment and buildings.

 

PBB, PBDE, TBBPA and other brominated flame retardants are currently widely used in the electronic and electrical industry, including circuit boards, computers, fuel cells, televisions, printers, and more.

These halogenated flame retardant materials produce dioxins during combustion and can exist in the environment for many years, even accumulating in organisms for life, which cannot be discharged.

Therefore, many international companies are actively promoting the complete abolition of halogen containing materials, such as banning the use of halogen flame retardants in their products.

 

At present, different products have different limit standards for halogen-free requirements:

If there are no halogenated wires and cables, the halogen index is: the value of all halogens is ≤ 50PPM;

According to regulation PREN 14582, the content of hydrogen halide gas produced after combustion is less than 100PPM;

According to regulation EN 5067-2-1, the pH value of the hydrogen halide gas produced after combustion dissolved in water is ≥ 4.3 (weakly acidic);

According to regulation EN-5 0267-2-2, after combustion in a closed container, the product emits a beam of light with a transmittance of ≥ 60%;

According to regulation EN-50268-2, halogen-free requirements: bromine and chlorine content are less than 900ppm, and (bromine+chlorine) is less than 1500ppm.

 

Halogen refers to the VIIA group elements in the periodic table, including fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At). Halogen compounds, especially those containing chlorine and bromine, are widely used as flame retardants, solvents, plastic additives, etc. in industrial and consumer goods. However, certain halogen compounds have potential hazards to the environment and human health, and are therefore restricted in consumer products in many countries and regions. The following is a detailed explanation about halogens and their detection:

 

The hazards of halogen compounds
Halogen compounds may enter the human body through inhalation, skin contact, or ingestion, and their hazards include:

Environmental hazards:

Some halogen compounds, such as polychlorinated biphenyls and polybrominated biphenyls, are difficult to degrade in the environment and may have long-term impacts on ecosystems.

Health hazards:

Carcinogenicity: Polychlorinated biphenyls (PCBs) are listed as potential carcinogens.

Reproductive toxicity: May interfere with the endocrine system and affect reproductive health.

Toxicity: Brominated flame retardants may cause damage to the liver and nervous system.

 

The source of halogen compounds
Halogen compounds typically originate from the following pathways:

Flame retardants: such as polybrominated biphenyls (PBDEs) and hexabromocyclododecane (HBCD).

Plastic products: such as polyvinyl chloride (PVC).

Electronic and electrical products: such as circuit boards, wires and cables.

Solvent: such as chloroform, carbon tetrachloride.

Pesticides such as DDT.

 

Limit requirements for halogens
Different countries and regions have different limit requirements for halogen compounds. The following are common limit requirements:

1. European Union
RoHS Directive:

Limit the content of polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) to no more than 0.1% (1000 ppm).

REACH regulation:

Restrict certain halogen compounds, such as short chain chlorinated paraffins.

 

2. United States
CPSIA:

Limit the content of certain halogen compounds (such as PBDEs).

California 65:

Restrict certain halogen compounds, such as polychlorinated biphenyls.

 

3. China
GB/T 26572:

Restriction requirements for halogen compounds in electronic and electrical products.

Scope of application of halogen detection
Halogen detection is applicable to the following products and materials:

Electronic and electrical products: such as circuit boards, wires and cables.

Plastic products: such as PVC, ABS.

Textiles: such as flame-retardant fabrics.

Building materials: such as insulation materials.

Toys: such as plastic toys.

 

Standards and methods for halogen detection
Halogen detection usually adopts the following standards and methods:

1. Testing standards
IEC 61249-2-21:

Method for detecting halogen compounds in electronic and electrical products.

GB/T 26125:

Method for detecting halogen compounds in electronic and electrical products.

 

2. Testing methods
Ion Chromatography (IC):

Separate halide ions by ion chromatography and detect their content.

Gas chromatography-mass spectrometry (GC-MS):

Separate halogen compounds by gas chromatography and detect their content by mass spectrometry.

X-ray fluorescence spectroscopy (XRF):

Detect halogen element content through X-ray fluorescence.

 

The process of halogen detection
Sample preparation:

Prepare representative samples according to testing requirements.

Extraction of halogen compounds:

Extract halogen compounds from the sample using a solvent such as methanol.

Purification sample:

Purification of extraction solution by solid-phase extraction (SPE) and other methods.

Instrument analysis:

Use IC, GC-MS, or XRF to detect halogen content.

Result analysis:

Based on the test results, determine whether the sample meets the limit requirements.

 

How to reduce halogen content
Material selection:

Choose raw materials that do not contain halogens.

production process

Optimize production processes and reduce the use of halogen compounds.

Alternative substances:

Use environmentally friendly alternative substances (such as phosphorus based flame retardants).

Quality Control:

Regularly conduct halogen testing on products to ensure compliance with limit requirements.

 

summary
Halogen compounds are a type of chemical substance widely used in flame retardants, plastics, and electronic and electrical products. Due to their potential environmental and health hazards, halogen compounds are strictly restricted in consumer products in many countries and regions. Export products need to undergo halogen testing according to the requirements of the target market to ensure compliance with relevant regulations and standards.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year