图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Lamp cap gauge

Measure whether the size of the light source lamp head meets the requirements of IEC60061-1

The lamp head gauge is used to measure the size of the light source lamp head to ensure compliance with the requirements of IEC60061-1 standard. The following are the measurement steps:

 

1. Preparation work
Choose the appropriate gauge: Select the corresponding gauge based on the type of lamp head.

Clean the lamp head and gauge: Ensure that there are no impurities affecting the measurement.

 

2. Measurement steps
Insert lamp head: Insert the lamp head into the corresponding position of the gauge.

Check coordination: The lamp head should be able to be inserted smoothly without obvious looseness or tightness.

Measure key dimensions: Use the scales or markings on the gauge to measure key dimensions such as diameter, length, thread, etc.

Record data: Record all measurement results.

 

3. Compliance assessment
Comparison standard: Compare the measurement data with the IEC60061-1 standard.

Compliance assessment: If all dimensions are within the standard range, it is considered qualified.

 

4. Precautions
Regularly calibrate gauges to ensure measurement accuracy.

Environmental control: Measurements are taken at standard temperature and humidity.

Operating standards: Avoid human error.

 

5. Records and Reports
Save records: Detailed record of each measurement result.

Generate report: Generate compliance report if necessary.

By following these steps, it can be ensured that the lamp head size complies with the IEC60061-1 standard.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year