图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

RF test

Provide high probability of air interface interoperability between the test prototype and other Bluetooth devices.

1. RF performance testing
Transmitter testing: Verify whether the transmission power, frequency offset, and modulation characteristics (such as GFSK, π/4-DQPSK) comply with Bluetooth standards. Ensure that the power is within the allowable range (Class 1/2/3) and avoid signals that are too strong or too weak.

Receiver testing: Test the receiver sensitivity (e.g. BLE needs to reach -70 dBm or above), anti-interference ability (same frequency/adjacent channel interference), and packet error rate (PER). Simulate long-distance scenarios using attenuators.

Frequency Tolerance and Frequency Hopping: Verify the Adaptive Frequency Hopping (AFH) function to ensure avoidance of occupied channels such as Wi Fi in interference environments.

 

2. Protocol consistency testing
Core protocol stack verification: Ensure that the physical layer (PHY), link layer (LL), L2CAP, ATT/GATT and other protocol implementations comply with the Bluetooth core specifications.

Connection process testing: including device discovery, pairing (Legacy/SSP), connection establishment, data exchange, and security mechanisms (encryption, MITM protection).

Profile compatibility: Verify each supported profile (such as HFP, A2DP, HID) one by one to ensure proper role (Central/Peripheral) switching.

 

3. Interoperability testing
Cross testing of multi brand devices: Pair with mainstream smartphones (iOS/Android), headphones, speakers, etc. to test connection success rate, data transmission stability, and audio quality.

Version compatibility: Test the backward compatibility with Bluetooth 4.0/4.2/5. x devices and verify the dual-mode (BR/EDR+BLE) device switching function.

Extreme scenario simulation: low battery mode, high load data transfer (such as continuous file transfer), and concurrent connection of multiple devices (such as 1 master and multiple slaves).

 

4. Environmental and anti-interference testing
Electromagnetic interference (EMI) testing: Evaluate connection stability and throughput in the presence of interference sources such as Wi Fi and microwave ovens.

Distance and occlusion test: By changing the distance and physical obstacles (such as walls), test the impact of signal attenuation on the connection.

 

5. Certification and compliance with standards
Bluetooth SIG certification: Through QDID certification, ensure compliance with RF/protocol consistency requirements. Perform pre testing before certification using reference test kits (such as PTS).

Regulatory certification: such as FCC, CE and other RF regulatory testing to ensure compliance with emission frequency bands and stray radiation.

 

6. Problem Investigation and Optimization
Log analysis: Use protocol analyzers (such as Ellisys, Frontline) to capture airborne packets and analyze the reasons for connection failures or data errors.

Parameter tuning: Adjust parameters such as Connection Interval and Slave Latency to balance power consumption and real-time performance.

Firmware update: fixes protocol stack or RF parameters through OTA updates for compatibility issues with specific devices.

 

7. Automated testing tools
RF tester: Use Anritsu MT8852B or R&S CMW500 for automated RF index measurement.

Interoperability testing platform: such as Bluetooth Test Studio, batch executes interaction testing with different devices.

summary
High probability interoperability requires a combination of standard compliance testing, multi scenario testing, and continuous optimization. Suggest establishing a testing matrix that covers mainstream devices and regularly updating test cases to address compatibility challenges with new devices and Bluetooth versions. At the same time, participate in Bluetooth SIG interoperability activities (such as UnplugFest) to expose potential issues in advance.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year