图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Electrostatic Discharge

The electrostatic discharge test simulates the discharge of static electricity carried by the human body when it comes into contact with the surface or surrounding metal objects of electronic and electrical equipment. Due to the fact that this type of discharge can cause misoperation of working electronic and electrical equipment through near-field electromagnetic changes, or cause equipment damage through energy absorption of electrostatic discharge by devices, corresponding testing standards need to be developed to test its reliability.

 

Test purpose

Evaluate the anti-interference performance of electronic and electrical equipment in electrostatic discharge environments.

Ensure that the device can withstand electrostatic discharge from human or metal objects during actual use.

Identify potential failure risks of equipment in electrostatic discharge environments.

 

Test Principle

The electrostatic discharge test simulates the electrostatic discharge of the human body or metal objects, applies specific voltage and waveform discharge pulses to the tested equipment (EUT), and observes whether the equipment has performance degradation or malfunction.

 

Test Standard

IEC 61000-4-2: Electromagnetic Compatibility (EMC) - Part 4-2: Electrostatic Discharge Immunity Test.

ISO 10605: Road vehicles - Electrostatic discharge immunity test.

 

Test level

The electrostatic discharge test is usually divided into different testing levels, depending on the equipment's usage environment and application field. Common testing levels include:

Contact discharge: ± 2 kV, ± 4 kV, ± 6 kV, ± 8 kV.

Air discharge: ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV.

 

test equipment

Electrostatic discharge simulator:

Used to generate electrostatic discharge pulses that comply with standards.

Discharge electrode:

Used for contact discharge and air discharge.

Grounding reference plane (GRP):

Used to provide a standard grounding reference.

Insulation support:

Used to support the tested equipment and ensure its insulation from the grounding reference plane.

Oscilloscope:

Used to monitor the waveform and amplitude of discharge pulses.

Shielding room or test bench:

Provide a testing environment without external interference.

 

Test steps

Preparation:

Install the device under test (EUT) on an insulated support and connect all necessary cables and power sources.

Ensure that the equipment is in normal working condition.

Set up testing environment:

Install electrostatic discharge simulators, discharge electrodes, and grounding reference planes in shielded rooms or test benches.

Calibrate the electrostatic discharge simulator to ensure that the waveform and amplitude of the discharge pulse meet the standard requirements.

Conduct testing:

Start the tested device and put it in typical working mode.

Generate discharge pulses with specific voltage and waveform using an electrostatic discharge simulator.

Apply discharge pulses to the surface or surrounding metal objects of the device under test through discharge electrodes.

Observe the performance changes of the equipment and record any abnormalities or malfunctions.

data analysis

Analyze test data and evaluate the anti-static discharge performance of the equipment.

Determine whether the equipment is qualified according to the standard limit.

 

test conditions

Discharge methods: contact discharge and air discharge.

Test voltage: Select the appropriate voltage according to the test level (such as ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV).

Test frequency: Each test point is usually discharged 10 times, with 5 times for positive and 5 times for negative polarity.

Testing time: The interval between each discharge is several seconds, and the specific time depends on the testing standard.

 

Precautions

Test environment: Ensure that there is no external interference in the shielded room or test bench.

Equipment status: Ensure that the tested equipment is in a typical working state, covering all possible working modes.

Discharge calibration: Regularly calibrate the electrostatic discharge simulator to ensure that the waveform and amplitude of the discharge pulse meet the standard requirements.

Safety protection: During the testing process, attention should be paid to the potential impact of high-voltage discharge on the human body and necessary protective measures should be taken.

 

Common problems and solutions

Equipment performance degradation:

Reason: Unreasonable circuit design, insufficient shielding, inadequate filtering, etc.

Solution: Optimize circuit design, add shielding measures, and use filters.

The test results are unstable:

Reason: External interference, unstable device operation status.

Solution: Test in a shielded environment to ensure consistent device operation.

 

Application field

Consumer electronics: mobile phones, computers, household appliances, etc.

Automotive electronics: in car entertainment systems, engine control units (ECUs), sensors, etc.

Industrial electronics: industrial controllers, motor drivers, etc.

Medical equipment: Anti static discharge performance testing of medical electronic devices.

 

Conclusion

The electrostatic discharge test is an important means of evaluating the anti-interference performance of electronic and electrical equipment in an electrostatic discharge environment. By simulating electrostatic discharge in actual environments, potential risks of equipment in actual working environments can be identified and necessary improvement measures can be taken. During the testing process, attention should be paid to the testing environment, equipment status, and discharge calibration to ensure the accuracy and reliability of the test results.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year