图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Electrical performance testing

Voltage and current characteristics: Overvoltage superposition, AC voltage, gradual rise and fall, power interruption, reverse polarity bias voltage, open circuit test, short circuit test, withstand voltage, insulation resistance

Electrical performance testing is an important step in evaluating the electrical performance and reliability of electronic components, circuits, or equipment. Common electrical performance tests include voltage and current characteristics, overvoltage, superimposed AC voltage, voltage rise and fall, power interruption, reverse polarity, bias voltage, open circuit test, short circuit test, withstand voltage, and insulation resistance.

 

1. Voltage and current characteristic testing

Purpose: To measure the current response of equipment or components at different voltages and plot the voltage current (V-I) curve.

Method:

Use an adjustable power supply and ammeter to gradually increase the voltage and record the current value.

Draw a V-I curve and analyze linearity, saturation point, and breakdown voltage.

Application: Evaluate the electrical characteristics of components such as diodes, transistors, resistors, etc.

 

2. Overvoltage test

Purpose: To verify the tolerance of equipment or components when the rated voltage is exceeded.

Method:

Apply a voltage higher than the rated voltage (usually 1.2-1.5 times the rated voltage) for a period of time.

Observe whether the equipment is damaged or its performance has decreased.

Applications: power supply equipment, fuses, capacitors, etc.

 

3. Overlay AC voltage test

Purpose: To test the performance of the equipment when a DC voltage is superimposed on an AC voltage.

Method:

Overlay a certain frequency and amplitude of AC voltage on the basis of DC voltage.

Measure the response of the equipment, such as ripple current, noise, etc.

Applications: power filters, voltage regulators, capacitors, etc.

 

4. Voltage gradual rise and fall test

Purpose: To evaluate the stability of the equipment during slow voltage changes.

Method:

Use a programmable power supply to slowly increase or decrease the voltage (such as a 5% change per minute).

Observe whether the equipment is working properly or if there are any abnormalities.

Applications: power modules, motor drivers, etc.

 

5. Power interruption test

Purpose: To test the response and recovery capabilities of the equipment in the event of a sudden power interruption.

Method:

Suddenly disconnect the power and record the response time and data loss of the device.

After restoring power, check if the device has returned to normal operation.

Applications: storage devices, microcontrollers, communication devices, etc.

 

6. Reverse polarity test

Purpose: To verify the tolerance of the device when the power polarity is reversed.

Method:

Reverse the polarity of the power supply and observe whether the equipment is damaged or whether the protective circuit is effective.

Applications: Battery powered devices, diodes, MOSFETs, etc.

 

7. Bias voltage test

Purpose: To test the performance of the equipment under specific bias voltages.

Method:

Apply bias voltage to measure the current, gain, or other parameters of the device.

Applications: transistors, amplifiers, sensors, etc.

 

8. Open circuit test

Purpose: To verify the characteristics of the device in an open circuit state.

Method:

Disconnect the load and measure the output voltage or current of the equipment.

Applications: power supply, battery, signal generator, etc.

 

9. Short circuit test

Purpose: To test the tolerance and protection mechanism of the equipment under short-circuit conditions.

Method:

Short circuit the output terminal and observe the current, temperature, and response of the protection circuit of the device.

Applications: power supply, transformer, battery, etc.

 

10. Voltage endurance test

Purpose: To verify the insulation performance of the equipment under high voltage.

Method:

Apply a test voltage higher than the rated voltage (such as 1.5-2 times the rated voltage) for a period of time.

Check for breakdown or leakage.

Applications: Insulation materials, cables, transformers, etc.

 

11. Insulation resistance test

Purpose: To measure the insulation resistance of equipment or materials under high voltage.

Method:

Use an insulation resistance tester (such as a megohmmeter) to apply high voltage and measure the resistance value.

It is usually required that the insulation resistance value be above megaohms (M Ω).

Application: Cable PCB、 Insulation materials, etc.

 

test equipment

Programmable power supply: used to provide adjustable voltage and current.

Multimeter: measures voltage, current, and resistance.

Oscilloscope: Observe voltage and current waveforms.

Insulation resistance tester: measures insulation resistance.

Voltage endurance tester: Conduct voltage endurance testing.

 

Precautions

Safety protection: Insulated gloves and goggles should be worn during high-voltage testing.

Testing environment: Ensure that the testing environment is dry and dust-free to avoid affecting insulation performance.

Equipment calibration: Regularly calibrate testing equipment to ensure measurement accuracy.

Testing time: The withstand voltage and insulation resistance testing time should not be too long to avoid damaging the equipment.

 

Application field

Electronic products: mobile phones, computers, household appliances, etc.

Industrial equipment: motors, transformers, power modules, etc.

Automotive electronics: battery management systems, car chargers, etc.

New energy: photovoltaic inverters, energy storage systems, etc.

 

Conclusion

Electrical performance testing is a crucial step in ensuring the reliability and safety of electronic devices and components. Through comprehensive electrical performance testing, the performance of equipment under different electrical conditions can be evaluated, providing scientific basis for design optimization and quality control.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year