图片名称

Solutions

Contact Us

图片名称
图片名称

National 24-hour service hotline

400-116-2629

Group Headquarters

Cell phone:18126505465

E-mail: webmaster@lcs-cert.com

Address: Shenzhen City, Baoan District, Shajing Street, Nga side of the school of Wei Juji Industrial Park, Building A 1 ~ 2 floor, Building C 3 floor

Life cycle testing

Test the lifespan of the battery

Life cycle testing is an important testing method for evaluating the performance degradation and life characteristics of batteries in multiple charge and discharge cycles. By simulating the charging and discharging process of batteries in actual use, detecting changes in parameters such as capacity, internal resistance, and energy efficiency, the lifespan of the battery can be determined. The following is the detailed content of the life cycle test:

 

1. Test purpose

Evaluate the performance degradation of the battery during multiple charge and discharge cycles.

Determine the cycle life of the battery (i.e. the number of cycles the battery undergoes before its capacity decays to a certain percentage).

Verify whether the battery meets relevant standards and requirements.

 

2. Testing principle

By repeatedly charging and discharging the battery, simulating the actual charging and discharging process in use, detecting changes in battery capacity, internal resistance, energy efficiency and other parameters, and evaluating its lifespan characteristics.

 

3. Testing methods

(1) Determine test parameters

Charge and discharge current: Determine the charge and discharge current based on the rated capacity (C) of the battery (such as 0.5C, 1C).

Cut off voltage for charging and discharging: The cut-off voltage for charging and discharging is determined based on the type of battery (such as lithium-ion batteries: 4.2V for charging and 2.75V for discharging).

Cycle times: determined according to testing standards or product requirements (such as 500 times, 1000 times).

Environmental conditions: typically 25 ℃± 5 ℃, relative humidity ≤ 65%.

(2) Initial performance testing

Fully charge the battery and record the initial capacity (C_initial) and internal resistance (R_initial).

Check the appearance of the battery to ensure there is no damage or abnormality.

(3) Charge discharge cycle test

Perform charging and discharging cycles on the battery with the specified charging and discharging current.

Charging: Charge with a constant current (such as 1C) until the cut-off voltage, and then charge with a constant voltage until the current drops to the cut-off current (such as 0.05C).

Discharge: Discharge at a constant current (such as 1C) until the cut-off voltage.

Record the charging and discharging capacity, voltage, current, and other data for each cycle.

Regularly (e.g. every 50 cycles) measure the internal resistance and energy efficiency of the battery.

(4) End condition of cycle

When the capacity of the battery decays to 80% of its initial capacity, the test is terminated.

Record the number of cycles as the battery's cycle life.

(5) Testing after testing

Measure the final capacity (C_final) and internal resistance (R_final) of the battery.

Check the appearance of the battery and record any abnormal phenomena such as expansion, leakage, or rupture.

Conduct safety performance tests (such as overcharge, overdischarge, short circuit tests) to evaluate the safety of the battery.

 

4. Testing standards

International standards:

IEC 61960 (Performance testing of lithium-ion batteries).

IEC 62133 (Safety requirements for portable sealed secondary batteries).

Industry standards:

GB/T 18287 (Performance Testing of Lithium ion Batteries, China).

JIS C 8712 (Performance Testing of Nickel Hydrogen Batteries, Japan).

 

5. Testing equipment

Battery charge and discharge tester: used for charge and discharge testing and capacity measurement.

Internal resistance tester: used to measure the internal resistance of batteries.

Constant temperature and humidity chamber: used to control the testing environment conditions.

Data logger: used to record voltage, current, temperature and other data during the testing process.

 

6. Data analysis and evaluation

 

7. Common problems and solutions

Rapid capacity decay: It may be due to a decrease in the performance of electrode materials or electrolytes during cycling, and material optimization or process improvement is needed.

Excessive increase in internal resistance: It may be due to damage to the electrode material or electrolyte during circulation, and material or design improvements are needed.

Low energy efficiency: It may be due to excessive internal impedance or excessive side reactions in the battery, and the battery design needs to be optimized.

 

8. Application scenarios

Battery testing for consumer electronics products such as mobile phones, laptops, and tablets.

Electric tools: such as battery testing for electric drills and chainsaws.

Electric vehicles: such as testing of electric vehicle power batteries.

Energy storage system: such as testing of solar energy storage batteries.

 

9. Test report

Test conditions: including charging and discharging current, cut-off voltage, number of cycles, environmental conditions, etc.

Test results: including capacity decay rate, internal resistance change rate, cycle life, energy efficiency, etc.

Conclusion and Suggestions: Evaluate whether the sample meets the relevant standards and propose improvement suggestions.

Through life cycle testing, the performance degradation and lifespan characteristics of the battery can be comprehensively evaluated in multiple charge and discharge cycles, ensuring that it can meet long-term usage needs in practical use.

6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year