图片名称

According to data, in the Chinese market alone, Cat.1 shipments will reach 110 million in 2021, an increase of more than 5 times compared to 2020. Cat.1 has become the main format of the cellular Internet of Things. This rapidly growing data is not only a replacement for the stock market, but also an expansion of the incremental market. It is inevitable for 2G/3G to withdraw from the network. This part of the gap is filled by NB-IoT and Cat.1. At the same time, the Ministry of Industry and Information Technology has also set a goal to make it clear that the future development of the Internet of Things will mainly focus on NB-IoT, 4G (including Cat.1), 5G As the direction, the overall development trend of IoT terminals is to gradually migrate to NB-IoT and Cat.1. NB-IoT and Cat.1 actually belong to the same category, and they are both types of LTE UE-Category. In March 2009, 3GPP released the Release 8 version, officially proposed LTE, and simultaneously launched five terminal categories from Cat.1 to Cat.5, which is the birth of Cat.1. Among them, Cat.1 is mainly used in the field of Internet of Things, but it has been tepid for more than ten years. Until 2020, it was suddenly pushed into the spotlight of the Internet of Things stage and finally ushered in its golden age. With the continuous development of the Release version, 3GPP is also constantly optimizing the types of terminals connected to the Internet of Things, and subsequently launched Cat.M1 (eMTC) and Cat.NB-1 (NB-IoT), giving more possibilities to the Internet of Things. However, these three "cats" for the Internet of Things have their own specialties. For example, NB-IoT itself has the characteristics of wide coverage, multiple connections, low power consumption and low cost, and is mainly used in urban-level narrowband connection projects; eMTC and The characteristics of NB-IoT are similar, the difference is that the transmission rate is faster than NB-IoT, and it has a certain real-time performance and supports voice. Cat.1 has good mobility, voice call function and high transmission rate, and has more potential in wearable devices, logistics tracking, etc.   According to research data, 60% of the scenarios in the cellular IoT connection distribution require narrowband networks to provide "low-rate" connections, about 10% of the scenarios require "high-rate" connection services, and the remaining 30% of IoT scenarios A "medium rate" connection service is required. While domestic NB-IoT has met the needs of most low-rate scenarios, eMTC has not established a complete ecosystem in China, so trillion-level medium-rate scenarios can only be handed over to Cat.1.

Tags

upstart,the,of,and,to,is,has,in,nb-iot,internet

Regulatory Background: Local manufacturers and importers of e-cigarettes are now required to apply for SIRIM certification and labelling after the Federal Government gazetted the Electronic Cigarette Equipment Trade Descriptions (Certification and Labelling) Order 2022 under the Trade Descriptions Act 2011. Trade Descriptions(Certification and Marking of Electronic Cigarette Device) Order 2022, Release Date: 2022.03.31, Effective Date: 2022.08.03. The relevant Order is that the Minister is exercising the powers conferred by Section 29 of the Trade Descriptions Act 2011 [Act 730] to require electronic cigarette information labels and related certifications.   Trade Descriptions  Informative marking and certification orders 29. ( 1 ) Where it appears to the Minister necessary or expedient in the interest of persons to whom any goods or any services in relation to that goods are supplied that the goods should be( a ) certified by a competent authority b ) marked with a mark determined by the Minister : or( c ) accompanied by any information ( whether or not amounting to or including a trade description ) or instruction relating to the goods   Regulation objects: The definition of "electronic cigarette device" refers to the Malaysian Standard MS2716 – Electronic cigarette device – Safety requirements and test methods. "spare part" - means any interchangeable part of an electronic cigarette device; Electronic cigarettes, and any replaceable parts of related electronic components, are within the scope of this order, excluding related E-liquids.   Competent authority: For the purpose of this order, SIRIM QAS International Sdn.Bhd. shall be the competent authority referred to in subsection 29(3) of the Act to certify and issue the marking of electronic cigarette devices or accessories in compliance with Malaysian Standard MS 2716. Note: the bill is trade description act 2011; (3) For the purpose of this section, “competent authority " means a competent authority named by the Minister after obtaining the agreement of the competent authority.     Apply for certification: (1) Anyone who supplies or offers to supply any electronic cigarette device or accessory shall apply to the competent authority for certification of the electronic cigarette device or accessory; (2) Electronic cigarette devices or accessories as described in (2). Subsection (1) shall read:— (a) certified by the competent authority to comply with Malaysian Standard MS 2716; and (b) marked with the SIRIM mark as specified in the Schedule.   Marking of electronic cigarette equipment or accessories: Any electronic cigarette device or part required to be marked in accordance with subsection 4(2)(b) shall be marked by affixing the marking specified in the Schedule in a conspicuous position:— (a) an electronic cigarette device or accessory; or (b) anything that provides an electronic cigarette device or accessory.   Authentication Mode: Type 5 or Type 1b     Type 5 certification mode is full test procedure, obtain product certification; Local manufacturer and Foreign manufacturer apply for related product certification scheme (type 5); there are related factory audit requirements, including related factory QC requirements.       Type 1b is a batch certification scheme, a batch certification program; Not a full type test is not a full project type test, confirmatory test/partial test confirmatory partial test, confirm related imported products and related full test report in the full project test report The claims are consistent.       MS 2716:2019 requires that:     A. components parts requirements: Battery: Meet the relevant MS IEC 62133-2; Charger: Meets relevant MS IEC 60950-1; USB ports: Complies with relevant MS IEC 60950-1. Note: The relevant components follow the requirements of electricity supply act B. Electronic control units (ECU) electronic control unit: 1. Automatic cut-off automatic cut off; 2. Child lock related requirements; 3. Automatic sleep Automatic sleep. Relevant requirements require standard design, and need to pass the functional test of MS 2716. C. Safety test safety test: 1. Drop test, follow the relevant test requirements of MS IEC 62133:2017, 1m drop, pay attention to the direction and related compliance requirements; 2. External short circuit test, following the corresponding test requirements of relevant MS IEC 62133:2017; 3. Risk of burns, temperature rise test under normal working conditions, normal heating of metal parts, plastic parts and related rubber parts needs to follow the temperature rise test; 4. Mechanical test, mechanical test, including related e-liquid overflow test, mechanical assembly test in accordance with UL 1439, sealing performance test, vibration test (XYZ three directions, 10-55Hz, 90min in each direction), impact test. D. chemical test, cigarette holder related to chemical te

Tags

standard,the,test,and,of,or,electronic,to,cigarette,related

澳洲-含纽扣电池产品的安全使用标准两个月后强制实施 Two months to go for button battery safety standards ACCC(澳大利亚竞争和消费委员会)正在敦促供应纽扣电池或由纽扣电池供电的产品的企业,确保他们在2022年6月22日法律强制执行之前符合新的纽扣电池安全标准。ACCC还呼吁消费者在家中检查不安全的按钮电池产品。   The ACCC(Australian Competition and Consumer Commission) is urging businesses who supply button batteries, or products that are powered by them, to ensure they are complying with the new button battery safety standards ahead of the laws becoming mandatory on 22 June,2022. The ACCC is also calling on consumers to check for unsafe button battery products in their homes.   根据强制性的安全和信息标准,产品必须有安全的电池腔,以防止儿童接触电池。制造商必须进行符合性测试,以儿童防护包装供应电池,并在包装和说明上附加警告和紧急建议。 Under the mandatory safety and information standards, products must have secure battery compartments to prevent children from gaining access to the batteries. Manufacturers must undertake compliance testing, supply batteries in child-resistant packaging, and place additional warnings and emergency advice on packaging and instructions.   在澳大利亚,涉及纽扣电池的事故已造成3名儿童死亡,44人严重受伤。每月都有超过一名儿童因摄入或插入纽扣电池而严重受伤,而全世界数以百万计的消费品中都含有纽扣电池。 Three children have died and 44 have been severely injured in Australia from incidents involving button batteries, and more than one child a month is seriously injured as a result of ingesting or inserting the batteries, which are contained in millions of consumer goods worldwide.     立讯实验室已为多个大型客户提供相关检测评估服务,出具的检测报告获得监管部门认可,欢迎广大客户来电垂询! LCS Laboratory has provided related testing and evaluation services for a lot of customers, and the testing report issued has been recognized by the regulatory authorities. Welcome customers to inquire!  

Tags

standard,电池,the,and,纽扣,to,button,accc,battery,产品

On March 11, 2022, the State Tobacco Monopoly Administration announced the "Administrative Measures for Electronic Cigarettes"; on April 8, the State Administration for Market Regulation (National Standardization Administration) issued the national standard for "Electronic Cigarettes". On April 13, the State Administration for Market Regulation and relevant departments of the State Tobacco Monopoly Administration answered relevant questions of public concern. In this issue, we extract some key information from the answers issued by the relevant national authorities to analyze how to better meet the national policy requirements for stakeholders.   object of supervision a. Electronic cigarettes, atomizers, nicotine for electronic cigarettes and other new tobacco products have all been brought into the scope of supervision; b. Electronic cigarettes include pods, smoking sets, and products sold in combination with pods and smoking sets; c. Prohibit the sale of flavored e-cigarettes other than tobacco flavors and e-cigarettes that can add atomizers by themselves, and include e-cigarette products that do not contain nicotine into the scope of supervision; d. Heated cigarettes have been included in cigarette management. At present, my country has not approved heated cigarettes for sale in China, and no market entity is allowed to illegally operate heated cigarettes.   Regulatory measures a. Implement license management for production, wholesale and retail market entities; b. Strict quality control, and establish a management system for technical review, sampling and traceability of electronic cigarette products; c. Implement sales channel management. Establish a unified national e-cigarette transaction management platform, and incorporate e-cigarette-related business activities into platform management. E-cigarette product manufacturers and e-cigarette brand owners that have obtained tobacco monopoly licenses in accordance with the law shall sell e-cigarette products to e-cigarette wholesale enterprises through the e-cigarette transaction management platform; d. The transportation of electronic cigarettes, vaping products, nicotine for electronic cigarettes, etc. shall be subject to the supervision of the administrative department of tobacco monopoly; e. The administrative department of tobacco monopoly of the State Council shall conduct pre-examination on the initial public offering and listing of electronic cigarette manufacturers, atomizer manufacturers and electronic cigarette nicotine manufacturers at home and abroad; f. Supervise and manage the import and export trade of electronic cigarettes and foreign economic and technological cooperation in accordance with the law, improve management measures, optimize work processes, and serve the export of electronic cigarettes that meet relevant requirements.   Official release of national standards for electronic cigarettes On April 8, 2022, the State Administration for Market Regulation (Standard Committee) released the mandatory national standard GB 41700-2022 "Electronic Cigarettes". The standard contents mainly include: a. Clarified terms and definitions related to electronic cigarettes and atomizers; b. Put forward principle requirements for the design of electronic cigarettes and the selection of raw materials; c. Put forward clear technical requirements for electronic cigarettes, atomizers and emissions, and provide supporting test methods; d. Provisions are made for the signs and instructions of electronic cigarette products.   Technical characteristics of national standards for electronic cigarettes a. It is stipulated that e-cigarettes are "electronic delivery systems used to generate aerosols for human smoking, etc.", and e-cigarettes without nicotine are included in the definition of e-cigarettes; b. The standard clearly stipulates that the characteristic flavor of the product should not show other flavors than tobacco, and clearly requires that "aerosols should contain nicotine", and electronic cigarette products without nicotine shall not be sold in the market; c. According to the principle of use of additives, the standard clearly lists 101 kinds of additives that are allowed to be used, and is included in the "white list" of additives.   Implementation date a. The "Measures for the Administration of Electronic Cigarettes" will come into force on May 1, 2022; b. The national standard for "E-cigarettes" will be implemented from October 1, 2022; c. The transition period ends on September 30, 2022.     2022 seems to be an unusual year for all relevant parties in my country's electronic cigarette industry. Only by continuously following up and grasping the national policy requirements for electronic cigarette control can enterprises develop by leaps and bounds. Luxshare closely follows the national control trends in e-cigarettes and new types o

Tags

standards,the,and,of,electronic,for,cigarettes,national,in,cigarette

< 1...787980...87 > proceed page
6 individual

Large-scale experimental base

150 individual

Professional Lab

30 All kinds of

Analysis Method

8 million times

Testing/year