Hotline:4007-886-986

Subsidiary

Shenzhen LCS Compliance Testing Laboratory Ltd    粤ICP备17001856号  Powered by:300.cn

H.R

>
>
>
E-MARK Certification

Recruitment details

E-MARK Certification

E / e Mark is the European Common Market, which is required to comply with the requirements of the EEC Directives and the EEC Regulation, in accordance with the provisions of the European Union Act (EEC Directives) and the European Economic Commission (ECE Regulation) Certification requirements, that is, to grant a certificate of competency to ensure the safety of traffic and environmental protection requirements. E-Mark is different depending on the country of certification.

E / e Mark is the abbreviation of automotive electronics, automotive electronics is the body of automotive electronic control devices and automotive automotive electronic control device collectively. Body car electronic control device, including engine control system, chassis control system, body electronic control system. The most significant feature of automotive electronics is to control the system to promote the use of sensors, microprocessors MPU, actuators, dozens or even hundreds of components and components of the electronic control system, is getting a very wide range of markets; Automotive electronics include automotive information systems, car navigation systems, automotive entertainment systems. Car body like a naked, do not wear any clothing, ornaments of the human body; and the latter like a person wearing clothing, ornaments.


E / e Mark Certification Applicable products include:

A vehicle, that is, two or more motor vehicles, such as buses, trucks, motorcycles, buses and vehicles outside the road;

Second, the steam locomotive components - lights and bulbs, all kinds of mirrors, tires, wheels, brakes, speakers, security equipment, seat belts, automotive glass and exhaust pipe;

Third, the steam locomotive accessories - helmets, children's safety chairs, car accessories and other electrical products.

Since October 2002, all vehicles, vehicle parts, and electronic products for vehicles must be subject to EMC testing. All electronic components sold in Europe shall be uniformly compliant with EMC Directive 95/54 / EC and self-declaration under EMC Directive 89/336 / EEC shall cease to be valid. And by the EU authorized vehicle products announcement agency issued E / e Mark certificate. In other words, the vehicle type of electronic and electronic components of the original application of the CE (EMC) certification will be no longer effective since October 2002. You must re-apply for the E / eMark certificate issued by the European National Transport Department before being sold in the European market.
 

E / e Mark testing and certification procedures:

Manufacturers to prepare technical information and samples

carry out testing

The first application must be factory inspection

Has been awarded the European Union national certification body ISO9000 quality system certificate manufacturers in principle do not have to do factory inspection

Test report and technical information submitted to the vendor

European national transport department issuing

The issuing authority may carry out regular or irregular tracking of the factory inspection of the certified product manufacturer


E / e Mark logo
 

E / e Mark logo is divided into two forms, one is a rectangular frame, one is a circular frame, respectively, on behalf of different meanings:

Rectangular frame: refers to the vehicle in the stop and exercise conditions, can be used normally rather than must use the product, such as: car charger, car boarding / Dentsu, car air pump, car massage / heating cushion, car fan, car Refrigerators, car Kettle, car TV / stereo, car vacuum cleaners, car power tools, car electric jack, and so on.

Round frame: refers to the vehicle to stop and exercise the state, must use the product, such as: windshield, seat belts, headlights and so on.


E & e The Difference
 

Logo
Exx  
 exx
Specification name
Regulation
Directive
To develop a unit
ECE
EC
Headquarters Geneva Brussels
Membership Members of the United Nations are free to join Need to be a member of EC Member States
Applicable area Europe and other regions EC Member States
Acceptance of Member States Non-mandatory, free to choose Mandatory, all articles are subject to acceptance
Involving products Parts and system components Motor vehicle, safety parts and systems
Testing Agency ECE Member States technical service agencies Members of the European Union within the technical service agencies
Issuing Authority ECE member states of government departments The government departments of the EU member states
Certificate approval Market acceptance EU member states all recognized


E / e Mark Certification Common Q & A Q & A


First, E / e-mark certification for which products?

1. Vehicle; that is, two or more motor-driven vehicles, such as passenger cars, trucks, bus-class roads outside the vehicle.

2. Steam locomotive components; that is, cars and light bulbs, all kinds of mirrors, tires, wheel right, Shache, speakers, anti-theft equipment, seat belts, automotive glass and exhaust pipe.

3. Steam locomotive accessories; that is, helmets, children's safety chairs, car accessories and electronic products.

4. Common domestic E logo certification products are automotive light bulbs, safety glass, tires, triangular warning signs, automotive electronics and so on.

Second, the automotive electronics products, what are the test items?

1. Materials of electrical, thermal, mechanical testing

2. Mechanical environment reliability test

3. Climate and environment reliability test

4. Electronic product EMC & LVD testing

5. Product performance and life testing

6. Product surface anti-fouling scratch resistance and other properties

Previous article:
Next article: